For example, a custom-built extra-wide reversible packer with a longitudinal travel device. A plow packer with a 3.5m working width.
Furnishing:
- Wedge-shaped cast or packer rings with a diameter of 700mm and a 30° wedge angle
- double row ring rollers, working widths up to 4m
- Add-on console attached to the side with generous bracing across the entire width
- suitable for road trips without a folding console
- Front packer frame, DP series for ring diameters up to 700mm
- Frame made of square tube 80X80mm fine-grain structural steel
- KAT2 mounting bracket with elongated hole on the lower link to compensate for slopes
- Variable tentacle system for used, refurbished or new tentacles to clip on
- 4-point quality flange bearing with galvanized end cover to protect against dirt
- Shaft and bearing diameter corresponding to the ring hub
- All standard and assembly parts included
Product features:
- Focus on seedbed preparation
- Good area of use in spring as a trailing device on the plow
- Cutting up large clods of earth for good soil connection
- promotes the formation of capillaries in the upper soil layers, ensures better irrigation of the seed
- increases the even emergence of seeds and stimulates growth
- very good reconsolidation
- Depending on the diameter, the wedge angle is suitable for sandy to clay soils
- Rather unsuitable in damp conditions due to the formation of channels, increased risk of siltation
Variation:
- Frame color in RAL5021
- available in RAL9005 / 3000
- Working widths from 1.6m to 4m possible
- Frame also available individually including shaft and bearings
- Cleaning chains, warning signs and lighting optional
General safety instructions for the above product:
Before each use, check the machine and tractor for roadworthiness and operational safety!
Check fastening and bolt connections before commissioning!
Do not stand under a raised machine!
Staying in the work area is prohibited!
Riding during work and transporting on the machine are prohibited!
Danger from ejected foreign objects! Remove people from the danger area!
Never leave the driver’s cab while driving!
Repair any damage immediately before using the machine again!
Check screws regularly to ensure they are tight!
Never lift the cultivator when the roller is closed! There is a risk of breakage!
Operating instructions and safety stickers are included in the delivery
Liability:
No liability is assumed for damage caused by improper installation, use or structural modifications.
Questions or advice:
If you are unsure about suitability or installation, please contact us.
We will be happy to advise you.
Tel. 02526 9372093 Email: info@bm-maschinenbau.de
English (UK) 
Deutsch 
Français